- Home
- FAQs
FAQs
Straight answers.
Coverage figures, warranties, delivery, skylights, ventilation and safety. Search below, or call the counter.
What are your hours?
Monday to Friday, 7 am to 5 pm, and Saturday, 7 am to 3 pm.
Where are you located?
We have two yards: 425 Evans Avenue in Etobicoke and 30 Lightbeam Terrace in Brampton. Directions to both are on the Contact page.
What is your return policy?
Bring the product back in good condition with the original receipt for a full refund, less a 10% restocking fee on each returned product.
Do you sell to homeowners as well as contractors?
Yes. We serve both the residential and commercial markets. Bring your roof measurements or your roofer's material list and we will help you put the order together.
How do I get a price?
Material prices move with the market, so we do not publish them online. Add products to your quote list on this site and send it to us, or call the counter with your list, and we will confirm price and availability.
Can you special-order a shingle or colour you do not stock?
Yes. Many more shingle lines and colours are available by special order. Lead time depends on the manufacturer, so ask the counter when you order.
Which brands do you carry?
Shingles from IKO, CertainTeed, GAF and CRC, DaVinci composite slate, VELUX and Columbia skylights, Duraflo and 4Seasons ventilation, Torchflex and Armourbond membranes, and Metabo HPT nailers. If you need a brand that is not listed, ask us.
How far ahead should I book a rooftop delivery?
Rooftop slots fill quickly, so please ask for one two to three days before you need the material on the roof. Ground deliveries are usually easier to fit in. Call the counter and we will tell you the next opening.
What is the difference between ground and rooftop delivery?
For ground delivery, a flatbed truck with its own forklift sets the pallets down on your driveway or site. For rooftop delivery, a crane truck lifts the material straight onto the roof so nobody has to carry bundles up a ladder.
Where do you deliver?
Anywhere in the Greater Toronto Area, and further by special request. Tell us the address when you order and we will confirm.
What should I have ready for a rooftop delivery?
Clear access for the truck close to the building. When you book, tell us about overhead wires, soft ground or tight laneways. Have someone on site to confirm where the load should go, and ask for bundles to be spread along the roof rather than stacked in one place.
How much roof does one bundle of shingles cover?
About 32 sq ft per bundle.
How many bundles of shingles do I need?
Roofers measure in squares. One square is 100 sq ft, which takes about three bundles of most architectural shingles. Add roughly 10% for waste on a simple roof and more for a roof with many hips and valleys. Starter strip and hip and ridge shingles are counted separately. Bring us your measurements and we will work out the full list.
How long is the warranty on shingles?
It depends on the brand and line. Three-tab shingles carry up to 25 years. Architectural shingles range from 40 to 50 years. Ask us for the manufacturer warranty sheet for the line you are buying.
Which shingles go on the hips, ridges and edges?
Use either traditional three-tab shingles cut to size or purpose-made hip and ridge shingles that match your field shingle.
What is the difference between three-tab and architectural shingles?
Three-tab shingles are a single flat layer with a uniform pattern. Architectural (laminated) shingles are two layers bonded together. They are heavier, look more dimensional, and generally carry a longer warranty and a higher wind rating.
Should I use felt or synthetic underlay?
Both go under the shingles as a second line of defence. Synthetic underlay is lighter and stronger, lies flatter and can stay exposed longer, so most crews now prefer it. Felt costs less per roll. Check the shingle manufacturer's installation instructions, since some warranties specify the underlay.
Do I need ice and water protection?
In Ontario, eave protection is a building code requirement on most shingled roofs, and a self-adhering ice and water membrane along the eaves and in the valleys is standard practice. It seals around the nails and protects against water backing up behind ice dams.
How many nails go in each shingle?
Most manufacturers call for four nails per shingle, and six in high-wind areas or on steep slopes. Follow the nailing line and the instructions printed on the bundle wrapper. Nailing outside them can void the warranty.
Do you carry a base sheet that does not need a torch?
Yes. Armourbond Flash is a peel-and-stick base sheet. One roll covers 98 sq ft.
How much does a roll of 250 cap sheet cover?
One roll of 250 cap sheet covers 78 sq ft.
How much do base sheets cover?
It depends on thickness. A roll of Base 180 covers 98 sq ft and a roll of 2.2 mm base covers 147 sq ft.
How much does a piece of protection board cover?
Each board covers 20 sq ft.
What is a two-ply modified bitumen roof?
It is the most common membrane system on low-slope roofs. A base sheet is fastened, adhered or torched to the deck or cover board, then a granulated cap sheet is torched or adhered over it. The granules on the cap sheet protect the membrane from the sun.
Do you sell torches and propane?
Yes. Torch kits, regulators, hoses and 40 lb propane are all in the catalogue, along with seam rollers and probes.
What is the difference between curb-mount and deck-mount skylights?
A curb-mounted skylight sits on a raised frame (the curb) built on the roof, which suits flat and low-slope roofs and many replacements. A deck-mounted skylight fastens directly to the roof deck for a lower profile on pitched roofs.
Should I choose a fixed or a venting skylight?
A fixed skylight does not open and is for daylight only. A venting skylight opens to let out heat and moisture, which helps in kitchens and bathrooms. We carry manual and solar-powered venting models.
Do I need a flashing kit with a skylight?
A deck-mounted skylight needs the manufacturer's flashing kit matched to your roofing material and slope. A curb-mounted skylight is flashed to its curb as part of the roofing work. Tell us the roof type and we will match the right kit.
How much attic ventilation does a roof need?
A common rule is 1 sq ft of net free vent area for every 300 sq ft of insulated ceiling, split between intake at the soffits and exhaust near the ridge. Low-slope roofs need more. Check the building code and the shingle manufacturer's requirements for your roof.
Ridge vent or box vents?
Either works when it is sized properly and paired with clear soffit intake. Ridge vent exhausts evenly along the peak and is nearly invisible. Box vents are simple to add or replace. Avoid mixing different exhaust types on the same attic space, because one can pull air from the other instead of from the soffits.
Do you carry solar-powered vents?
Yes, including the 4Seasons solar powered vent, which uses its own panel to run the fan.
What fall protection do I need on a roof?
Ontario requires fall protection on construction projects where a worker could fall 3 metres or more, and workers who use it must have approved Working at Heights training. We stock harnesses, rope grabs, lanyards, roof anchors and complete kits. Confirm the current requirements with the Ministry of Labour.
Do you sell nailers and nails?
Yes. Coil roofing nailers, including Metabo HPT, plus coil and hand nails in galvanized and electro-galvanized.
When do I use plastic cement and when do I use caulking?
Plastic cement is a thick asphalt compound applied with a trowel for sealing flashings, patching and bedding shingles. Caulking comes in a tube for a neat bead around vents, flashings and fasteners. Many repairs use both.
No question matches that. Call (416) 850-9559 and ask us directly.
Coverage figures are per roll, board or bundle as supplied. Building code and safety notes are general guidance for Ontario. Always confirm against the manufacturer's current data sheet and the current regulations for your job.







